Home/P1P/JAYO/TPU Silk 98A
JAYO · overlaid on Bambu's TPU 95A

JAYO TPU Silk 98A for the P1P

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a JAYO TPU Silk 98A spool — the big one first.

Bambu profiles its own filament, not JAYO's. These start from Bambu's TPU 95A reference and apply JAYO's published specs where available.
Max volumetric flowupdates live
3.6 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
43mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.05
starting point — refine on-machine
Flow ratio
1
Bambu base (inherited)
Retraction length
1.2mm
Bambu base (inherited)
hotend ceiling 3.6 mm³/s · Bambu default — JAYO publishes none ⚠ clamped — capped below your target speed
JAYO · TPU Silk 98A Flexible glossy product page
Nozzle225 °C
Densitynot published
Mfr speed50–200 mm/s
Mfr bed50–60 °C
Shore98A
Two-mode profile (per-page): 210–220 °C @ 50–100; 220–240 °C @ 100–200. Not in TDS bundle
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 1 · ceiling 3.6 mm³/s
Source
product page · manufacturer ↗

Why these numbers

JAYO TPU Silk 98A starts from Bambu's TPU 95A reference; JAYO's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Two-mode profile (per-page): 210–220 °C @ 50–100; 220–240 °C @ 100–200. Not in TDS bundle

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the JAYO TPU Silk 98A profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

JAYO TPU Silk 98A for the X1 Carbon
/p/x1c/jayo/tpu-silk-98a
JAYO TPU Silk 98A for the A1
/p/a1/jayo/tpu-silk-98a
JAYO TPU Silk 98A for the A1 mini
/p/a1_mini/jayo/tpu-silk-98a
Bambu Lab TPU 95A for the P1P
/p/p1p/bambu-lab/tpu-95a
ColorFabb TPU 85A for the P1P
/p/p1p/colorfabb/tpu-85a
ColorFabb TPU 95A for the P1P
/p/p1p/colorfabb/tpu-95a