Home/P1P/Bambu Lab/TPU 95A
Bambu Lab · overlaid on Bambu's TPU 95A

Bambu Lab TPU 95A for the P1P

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Bambu Lab TPU 95A spool — the big one first.

Bambu profiles its own filament, not Bambu Lab's. These start from Bambu's TPU 95A reference and apply Bambu Lab's published specs where available.
Max volumetric flowupdates live
3.6 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
43mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.05
starting point — refine on-machine
Flow ratio
1
Bambu base (inherited)
Retraction length
1.2mm
Bambu base (inherited)
hotend ceiling 3.6 mm³/s · Bambu default — Bambu Lab publishes none ⚠ clamped — capped below your target speed
Bambu Lab · TPU 95A Flexible product page
Nozzle230 °C
Density1.22 g/cm³
Drying70 °C / 8 h (oven); 80–90 °C / 12 h (X1 heatbed)
Mfr speed≤200 mm/s
Mfr bed30–35 °C
Shore95A
AMS compatibility limited. Nozzle/bed/speed/density/drying from the TPU 95A HF V1.0 TDS PDF (the current Bambu 95A product).
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 1 · ceiling 3.6 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Bambu Lab TPU 95A starts from Bambu's TPU 95A reference; Bambu Lab's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

AMS compatibility limited. Nozzle/bed/speed/density/drying from the TPU 95A HF V1.0 TDS PDF (the current Bambu 95A product).

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Bambu Lab TPU 95A profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Bambu Lab TPU 95A for the X1 Carbon
/p/x1c/bambu-lab/tpu-95a
Bambu Lab TPU 95A for the A1
/p/a1/bambu-lab/tpu-95a
Bambu Lab TPU 95A for the A1 mini
/p/a1_mini/bambu-lab/tpu-95a
ColorFabb TPU 85A for the P1P
/p/p1p/colorfabb/tpu-85a
ColorFabb TPU 95A for the P1P
/p/p1p/colorfabb/tpu-95a
Creality TPU (generic family) for the P1P
/p/p1p/creality/tpu-generic-family