Home/P1P/Elegoo/TPU 95A
Elegoo · overlaid on Bambu's TPU 95A

Elegoo TPU 95A for the P1P

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Elegoo TPU 95A spool — the big one first.

Bambu profiles its own filament, not Elegoo's. These start from Bambu's TPU 95A reference and apply Elegoo's published specs where available.
Max volumetric flowupdates live
3.6 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
43mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.05
starting point — refine on-machine
Flow ratio
1
Bambu base (inherited)
Retraction length
1.2mm
Bambu base (inherited)
hotend ceiling 3.6 mm³/s · Bambu default — Elegoo publishes none ⚠ clamped — capped below your target speed
Elegoo · TPU 95A Flexible product page
Nozzle230 °C
Density1.16 g/cm³
Drying70 ±5 °C
Mfr speed≤60 mm/s
Mfr bed30–45 °C
Shore95A
Chamber 20–45 °C; tensile X-Y 16 MPa; elongation >500%; impact "do not fracture"; melting 188 °C; mechanical Z-properties not published
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 1 · ceiling 3.6 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Elegoo TPU 95A starts from Bambu's TPU 95A reference; Elegoo's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Chamber 20–45 °C; tensile X-Y 16 MPa; elongation >500%; impact "do not fracture"; melting 188 °C; mechanical Z-properties not published

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Elegoo TPU 95A profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Elegoo TPU 95A for the X1 Carbon
/p/x1c/elegoo/tpu-95a
Elegoo TPU 95A for the A1
/p/a1/elegoo/tpu-95a
Elegoo TPU 95A for the A1 mini
/p/a1_mini/elegoo/tpu-95a
Bambu Lab TPU 95A for the P1P
/p/p1p/bambu-lab/tpu-95a
ColorFabb TPU 85A for the P1P
/p/p1p/colorfabb/tpu-85a
ColorFabb TPU 95A for the P1P
/p/p1p/colorfabb/tpu-95a