Home/X1 Carbon/Elegoo/ASA
Elegoo · overlaid on Bambu's ASA

Elegoo ASA for the X1 Carbon

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Elegoo ASA spool — the big one first.

Bambu profiles its own filament, not Elegoo's. These start from Bambu's ASA reference and apply Elegoo's published specs where available.
Max volumetric flowupdates live
18 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
214mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.04
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 18 mm³/s · Bambu default — Elegoo publishes none ⚠ clamped — capped below your target speed
Elegoo · ASA UV-resistant product page
Nozzle255 °C
Density1.09 g/cm³
Drying80 ±5 °C / 8 h
Mfr speed≤220 mm/s
Mfr bed90–100 °C
Enclosurerequired
Enclosure REQUIRED; chamber 45–60 °C; HDT 99 °C; Vicat 102 °C (highest in lineup); tensile X-Y 35 MPa
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

!
Bambu ships no ASA profile for the 0.4 mm nozzle
Tested sizes: 0.6, 0.8 mm. Using nearest defaults — verify with a calibration print.
Against Bambu stock
flow 0.95 · ceiling 18 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Elegoo ASA starts from Bambu's ASA reference; Elegoo's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Enclosure REQUIRED; chamber 45–60 °C; HDT 99 °C; Vicat 102 °C (highest in lineup); tensile X-Y 35 MPa

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Elegoo ASA profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Elegoo ASA for the A1
/p/a1/elegoo/asa
Elegoo ASA for the A1 mini
/p/a1_mini/elegoo/asa
Elegoo ASA for the P1S
/p/p1s/elegoo/asa
Bambu Lab ASA for the X1 Carbon
/p/x1c/bambu-lab/asa
Eryone ASA for the X1 Carbon
/p/x1c/eryone/asa
Eryone ASA-CF for the X1 Carbon
/p/x1c/eryone/asa-cf