Home/X1 Carbon/Elegoo/ABS
Elegoo · overlaid on Bambu's ABS

Elegoo ABS for the X1 Carbon

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Elegoo ABS spool — the big one first.

Bambu profiles its own filament, not Elegoo's. These start from Bambu's ABS reference and apply Elegoo's published specs where available.
Max volumetric flowupdates live
16 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
190mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.04
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 16 mm³/s · Bambu default — Elegoo publishes none ⚠ clamped — capped below your target speed
Elegoo · ABS Basic product page
Nozzle250 °C
Densitynot published
Mfr speednot published
Mfr bed90–110 °C
Enclosurerequired
Enclosure required; spec block not yet extracted with extension
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.95 · ceiling 16 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Elegoo ABS starts from Bambu's ABS reference; Elegoo's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Enclosure required; spec block not yet extracted with extension

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Elegoo ABS profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Elegoo ABS for the A1
/p/a1/elegoo/abs
Elegoo ABS for the A1 mini
/p/a1_mini/elegoo/abs
Elegoo ABS for the P1S
/p/p1s/elegoo/abs
Amazon Basics ABS Filament 1.75 mm for the X1 Carbon
/p/x1c/amazon-basics/abs-filament-1-75-mm
Amazon Basics ABS Filament 2.85 mm for the X1 Carbon
/p/x1c/amazon-basics/abs-filament-2-85-mm
Bambu Lab ABS for the X1 Carbon
/p/x1c/bambu-lab/abs