Home/P2S/LANDU/Refillable Spool Hyper TPU
LANDU · overlaid on Bambu's TPU 95A

LANDU Refillable Spool Hyper TPU for the P2S

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a LANDU Refillable Spool Hyper TPU spool — the big one first.

Bambu profiles its own filament, not LANDU's. These start from Bambu's TPU 95A reference and apply LANDU's published specs where available.
Max volumetric flowupdates live
3.36 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
40mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.05
starting point — refine on-machine
Flow ratio
1
Bambu base (inherited)
Retraction length
1.2mm
Bambu base (inherited)
hotend ceiling 3.6 mm³/s · Bambu default — LANDU publishes none ⚠ clamped — capped below your target speed
LANDU · Refillable Spool Hyper TPU Flexible (refill) product page
Nozzle225 °C
Densitynot published
Mfr speed20–40 mm/s
Mfr bed30–50 °C
Refillable-spool format; Shore hardness not published but values match 95A-class TPU envelope
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

!
P2S values are provisional
These envelope/flow values still need verifying against Bambu's shipped profile (SPEC.md §10).
Against Bambu stock
flow 1 · ceiling 3.6 mm³/s
Source
product page · manufacturer ↗

Why these numbers

LANDU Refillable Spool Hyper TPU starts from Bambu's TPU 95A reference; LANDU's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Refillable-spool format; Shore hardness not published but values match 95A-class TPU envelope

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the LANDU Refillable Spool Hyper TPU profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

LANDU Refillable Spool Hyper TPU for the X1 Carbon
/p/x1c/landu/refillable-spool-hyper-tpu
LANDU Refillable Spool Hyper TPU for the A1
/p/a1/landu/refillable-spool-hyper-tpu
LANDU Refillable Spool Hyper TPU for the A1 mini
/p/a1_mini/landu/refillable-spool-hyper-tpu
Bambu Lab TPU 95A for the P2S
/p/p2s/bambu-lab/tpu-95a
ColorFabb TPU 85A for the P2S
/p/p2s/colorfabb/tpu-85a
ColorFabb TPU 95A for the P2S
/p/p2s/colorfabb/tpu-95a