Home/P2S/JAYO/ABS (white / opaque)
JAYO · overlaid on Bambu's ABS

JAYO ABS (white / opaque) for the P2S

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a JAYO ABS (white / opaque) spool — the big one first.

Bambu profiles its own filament, not JAYO's. These start from Bambu's ABS reference and apply JAYO's published specs where available.
Max volumetric flowupdates live
5.04 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
60mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.04
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 16 mm³/s · Bambu default — JAYO publishes none ⚠ clamped — capped below your target speed
JAYO · ABS (white / opaque) Basic product page
Nozzle255 °C
Densitynot published
Mfr speed40–60 mm/s
Mfr bed80–100 °C
Per-page data; not in TDS bundle (transparent variant is)
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

!
P2S values are provisional
These envelope/flow values still need verifying against Bambu's shipped profile (SPEC.md §10).
Against Bambu stock
flow 0.95 · ceiling 16 mm³/s
Source
product page · manufacturer ↗

Why these numbers

JAYO ABS (white / opaque) starts from Bambu's ABS reference; JAYO's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Per-page data; not in TDS bundle (transparent variant is)

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the JAYO ABS (white / opaque) profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

JAYO ABS (white / opaque) for the X1 Carbon
/p/x1c/jayo/abs-white-opaque
JAYO ABS (white / opaque) for the A1
/p/a1/jayo/abs-white-opaque
JAYO ABS (white / opaque) for the A1 mini
/p/a1_mini/jayo/abs-white-opaque
Amazon Basics ABS Filament 1.75 mm for the P2S
/p/p2s/amazon-basics/abs-filament-1-75-mm
Amazon Basics ABS Filament 2.85 mm for the P2S
/p/p2s/amazon-basics/abs-filament-2-85-mm
Bambu Lab ABS for the P2S
/p/p2s/bambu-lab/abs