Home/P2S/Inland/Tough PLA
Inland · overlaid on Bambu's PLA Basic

Inland Tough PLA for the P2S

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Inland Tough PLA spool — the big one first.

Bambu profiles its own filament, not Inland's. These start from Bambu's PLA Basic reference and apply Inland's published specs where available.
Max volumetric flowupdates live
21 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
250mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.02
starting point — refine on-machine
Flow ratio
0.98
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 21 mm³/s · Bambu default — Inland publishes none ⚠ clamped — capped below your target speed
Inland · Tough PLA High-impact product page
Nozzle220 °C
Densitynot published
Mfr speednot published
Mfr bed60–80 °C
"Professional toughness enhanced"; high impact strength
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

!
P2S values are provisional
These envelope/flow values still need verifying against Bambu's shipped profile (SPEC.md §10).
Against Bambu stock
flow 0.98 · ceiling 21 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Inland Tough PLA starts from Bambu's PLA Basic reference; Inland's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

"Professional toughness enhanced"; high impact strength

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Inland Tough PLA profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Inland Tough PLA for the X1 Carbon
/p/x1c/inland/tough-pla
Inland Tough PLA for the A1
/p/a1/inland/tough-pla
Inland Tough PLA for the A1 mini
/p/a1_mini/inland/tough-pla
3D-Fuel Tough Pro PLA+ for the P2S
/p/p2s/3d-fuel/tough-pro-pla
Amazon Basics PLA Filament 1.75 mm for the P2S
/p/p2s/amazon-basics/pla-filament-1-75-mm
Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the P2S
/p/p2s/amazon-basics/pla-filament-1-75-mm-1-25-kg