Home/P2S/Inland/PETG+ High Speed
Inland · overlaid on Bambu's PETG Basic

Inland PETG+ High Speed for the P2S

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Inland PETG+ High Speed spool — the big one first.

Bambu profiles its own filament, not Inland's. These start from Bambu's PETG Basic reference and apply Inland's published specs where available.
Max volumetric flowupdates live
15 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
179mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.045
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 15 mm³/s · Bambu default — Inland publishes none ⚠ clamped — capped below your target speed
Inland · PETG+ High Speed High-speed product page
Nozzle240 °C
Density1.23 g/cm³
Mfr speednot published
Mfr bed80 °C
Tensile 49 MPa; elongation 228 %
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

!
P2S values are provisional
These envelope/flow values still need verifying against Bambu's shipped profile (SPEC.md §10).
Against Bambu stock
flow 0.95 · ceiling 15 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Inland PETG+ High Speed starts from Bambu's PETG Basic reference; Inland's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Tensile 49 MPa; elongation 228 %

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Inland PETG+ High Speed profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Inland PETG+ High Speed for the X1 Carbon
/p/x1c/inland/petg-high-speed
Inland PETG+ High Speed for the A1
/p/a1/inland/petg-high-speed
Inland PETG+ High Speed for the A1 mini
/p/a1_mini/inland/petg-high-speed
3D-Fuel Pro PETG for the P2S
/p/p2s/3d-fuel/pro-petg
Amazon Basics PETG Filament 1.75 mm for the P2S
/p/p2s/amazon-basics/petg-filament-1-75-mm
Amazon Basics PETG Filament 2.85 mm for the P2S
/p/p2s/amazon-basics/petg-filament-2-85-mm