Home/P2S/Eryone/Hyper-Speed ASA
Eryone · overlaid on Bambu's ASA

Eryone Hyper-Speed ASA for the P2S

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Eryone Hyper-Speed ASA spool — the big one first.

Bambu profiles its own filament, not Eryone's. These start from Bambu's ASA reference and apply Eryone's published specs where available.
Max volumetric flowupdates live
16.8 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
200mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.04
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 18 mm³/s · Bambu default — Eryone publishes none ⚠ clamped — capped below your target speed
Eryone · Hyper-Speed ASA High-speed tds
Nozzle245 °C
Density1.05 g/cm³
Drying90–100 °C / 12 h
Mfr speed30–200 mm/s
Mfr bed75–90 °C
Enclosurerequired
Enclosure required
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

!
Bambu ships no ASA profile for the 0.4 mm nozzle
Tested sizes: 0.6, 0.8 mm. Using nearest defaults — verify with a calibration print.
!
P2S values are provisional
These envelope/flow values still need verifying against Bambu's shipped profile (SPEC.md §10).
Against Bambu stock
flow 0.95 · ceiling 18 mm³/s
Source
tds · manufacturer ↗

Why these numbers

Eryone Hyper-Speed ASA starts from Bambu's ASA reference; Eryone's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Enclosure required

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Eryone Hyper-Speed ASA profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Eryone Hyper-Speed ASA for the X1 Carbon
/p/x1c/eryone/hyper-speed-asa
Eryone Hyper-Speed ASA for the A1
/p/a1/eryone/hyper-speed-asa
Eryone Hyper-Speed ASA for the A1 mini
/p/a1_mini/eryone/hyper-speed-asa
Bambu Lab ASA for the P2S
/p/p2s/bambu-lab/asa
Elegoo ASA for the P2S
/p/p2s/elegoo/asa
Eryone ASA for the P2S
/p/p2s/eryone/asa