Home/P2S/Elegoo/PLA Glow
Elegoo · overlaid on Bambu's PLA Basic

Elegoo PLA Glow for the P2S

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Elegoo PLA Glow spool — the big one first.

Bambu profiles its own filament, not Elegoo's. These start from Bambu's PLA Basic reference and apply Elegoo's published specs where available.
Max volumetric flowupdates live
21 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
250mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.02
starting point — refine on-machine
Flow ratio
0.98
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 21 mm³/s · Bambu default — Elegoo publishes none ⚠ clamped — capped below your target speed
Elegoo · PLA Glow Glow product page
Nozzle220 °CBambu base · not published
Densitynot published
Mfr speednot published
Hardened nozzle recommended; aesthetic SKU
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

!
P2S values are provisional
These envelope/flow values still need verifying against Bambu's shipped profile (SPEC.md §10).
Against Bambu stock
flow 0.98 · ceiling 21 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Elegoo PLA Glow starts from Bambu's PLA Basic reference; Elegoo's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Hardened nozzle recommended; aesthetic SKU

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Elegoo PLA Glow profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Elegoo PLA Glow for the X1 Carbon
/p/x1c/elegoo/pla-glow
Elegoo PLA Glow for the A1
/p/a1/elegoo/pla-glow
Elegoo PLA Glow for the A1 mini
/p/a1_mini/elegoo/pla-glow
3D-Fuel Tough Pro PLA+ for the P2S
/p/p2s/3d-fuel/tough-pro-pla
Amazon Basics PLA Filament 1.75 mm for the P2S
/p/p2s/amazon-basics/pla-filament-1-75-mm
Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the P2S
/p/p2s/amazon-basics/pla-filament-1-75-mm-1-25-kg