Home/P1S/Polymaker/Panchroma (Matte / Satin / Silk / Galaxy / Starlight etc.)
Polymaker · overlaid on Bambu's PLA Basic

Polymaker Panchroma (Matte / Satin / Silk / Galaxy / Starlight etc.) for the P1S

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Polymaker Panchroma (Matte / Satin / Silk / Galaxy / Starlight etc.) spool — the big one first.

Bambu profiles its own filament, not Polymaker's. These start from Bambu's PLA Basic reference and apply Polymaker's published specs where available.
Max volumetric flowupdates live
21 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
250mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.02
starting point — refine on-machine
Flow ratio
0.98
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 21 mm³/s · Bambu default — Polymaker publishes none ⚠ clamped — capped below your target speed
Polymaker · Panchroma (Matte / Satin / Silk / Galaxy / Starlight etc.) Aesthetic product page
Nozzle210 °C
Densitynot published
Drying55 °C / 6 h
Mfr speednot published
Mfr bed25–60 °C
All Panchroma SKUs share one parameter set. Glow / Luminous / Neon / UV-Shift variants need a hardened nozzle; Galaxy prefers 0.6 mm+ nozzles
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.98 · ceiling 21 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Polymaker Panchroma (Matte / Satin / Silk / Galaxy / Starlight etc.) starts from Bambu's PLA Basic reference; Polymaker's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

All Panchroma SKUs share one parameter set. Glow / Luminous / Neon / UV-Shift variants need a hardened nozzle; Galaxy prefers 0.6 mm+ nozzles

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Polymaker Panchroma (Matte / Satin / Silk / Galaxy / Starlight etc.) profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Polymaker Panchroma (Matte / Satin / Silk / Galaxy / Starlight etc.) for the X1 Carbon
/p/x1c/polymaker/panchroma-matte-satin-silk-galaxy-starlight-etc
Polymaker Panchroma (Matte / Satin / Silk / Galaxy / Starlight etc.) for the A1
/p/a1/polymaker/panchroma-matte-satin-silk-galaxy-starlight-etc
Polymaker Panchroma (Matte / Satin / Silk / Galaxy / Starlight etc.) for the A1 mini
/p/a1_mini/polymaker/panchroma-matte-satin-silk-galaxy-starlight-etc
3D-Fuel Tough Pro PLA+ for the P1S
/p/p1s/3d-fuel/tough-pro-pla
Amazon Basics PLA Filament 1.75 mm for the P1S
/p/p1s/amazon-basics/pla-filament-1-75-mm
Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the P1S
/p/p1s/amazon-basics/pla-filament-1-75-mm-1-25-kg