Home/P1S/Creality/Hyper ABS
Creality · overlaid on Bambu's ABS

Creality Hyper ABS for the P1S

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Creality Hyper ABS spool — the big one first.

Bambu profiles its own filament, not Creality's. These start from Bambu's ABS reference and apply Creality's published specs where available.
Max volumetric flowupdates live
16 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
190mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.04
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 16 mm³/s · Bambu default — Creality publishes none ⚠ clamped — capped below your target speed
Creality · Hyper ABS High-speed product page
Nozzle270 °CBambu base · not published
Densitynot published
Mfr speed≤300 mm/s
High-speed ABS line; specs not in the reference table
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.95 · ceiling 16 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Creality Hyper ABS starts from Bambu's ABS reference; Creality's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

High-speed ABS line; specs not in the reference table

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Creality Hyper ABS profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Creality Hyper ABS for the X1 Carbon
/p/x1c/creality/hyper-abs
Creality Hyper ABS for the A1
/p/a1/creality/hyper-abs
Creality Hyper ABS for the A1 mini
/p/a1_mini/creality/hyper-abs
Amazon Basics ABS Filament 1.75 mm for the P1S
/p/p1s/amazon-basics/abs-filament-1-75-mm
Amazon Basics ABS Filament 2.85 mm for the P1S
/p/p1s/amazon-basics/abs-filament-2-85-mm
Bambu Lab ABS for the P1S
/p/p1s/bambu-lab/abs