Home/P1S/Bambu Lab/PETG Translucent
Bambu Lab · overlaid on Bambu's PETG Basic

Bambu Lab PETG Translucent for the P1S

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Bambu Lab PETG Translucent spool — the big one first.

Bambu profiles its own filament, not Bambu Lab's. These start from Bambu's PETG Basic reference and apply Bambu Lab's published specs where available.
Max volumetric flowupdates live
18 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
214mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.045
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 18 mm³/s · Bambu default — Bambu Lab publishes none ⚠ clamped — capped below your target speed
Bambu Lab · PETG Translucent Translucent product page
Nozzle245 °C
Densitynot published
Drying65 °C / 8 h
Mfr speednot published
Mfr bed60–80 °C
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.95 · ceiling 18 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Bambu Lab PETG Translucent starts from Bambu's PETG Basic reference; Bambu Lab's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Bambu Lab PETG Translucent profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Bambu Lab PETG Translucent for the X1 Carbon
/p/x1c/bambu-lab/petg-translucent
Bambu Lab PETG Translucent for the A1
/p/a1/bambu-lab/petg-translucent
Bambu Lab PETG Translucent for the A1 mini
/p/a1_mini/bambu-lab/petg-translucent
3D-Fuel Pro PETG for the P1S
/p/p1s/3d-fuel/pro-petg
Amazon Basics PETG Filament 1.75 mm for the P1S
/p/p1s/amazon-basics/petg-filament-1-75-mm
Amazon Basics PETG Filament 2.85 mm for the P1S
/p/p1s/amazon-basics/petg-filament-2-85-mm