Home/P1P/SUNLU/Silk PLA+
SUNLU · overlaid on Bambu's PLA Basic

SUNLU Silk PLA+ for the P1P

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a SUNLU Silk PLA+ spool — the big one first.

Bambu profiles its own filament, not SUNLU's. These start from Bambu's PLA Basic reference and apply SUNLU's published specs where available.
Max volumetric flowupdates live
16.8 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
200mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.02
starting point — refine on-machine
Flow ratio
0.98
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 21 mm³/s · Bambu default — SUNLU publishes none ⚠ clamped — capped below your target speed
SUNLU · Silk PLA+ Silk tds
Nozzle210 °C
Densitynot published
Drying50 °C / 4 h
Mfr speed50–200 mm/s
Mfr bed50–60 °C
Cool / PLA plate; HDT 53 °C; glossy aesthetic
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.98 · ceiling 21 mm³/s
Source
tds · manufacturer ↗

Why these numbers

SUNLU Silk PLA+ starts from Bambu's PLA Basic reference; SUNLU's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Cool / PLA plate; HDT 53 °C; glossy aesthetic

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the SUNLU Silk PLA+ profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

SUNLU Silk PLA+ for the X1 Carbon
/p/x1c/sunlu/silk-pla
SUNLU Silk PLA+ for the A1
/p/a1/sunlu/silk-pla
SUNLU Silk PLA+ for the A1 mini
/p/a1_mini/sunlu/silk-pla
3D-Fuel Tough Pro PLA+ for the P1P
/p/p1p/3d-fuel/tough-pro-pla
Amazon Basics PLA Filament 1.75 mm for the P1P
/p/p1p/amazon-basics/pla-filament-1-75-mm
Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the P1P
/p/p1p/amazon-basics/pla-filament-1-75-mm-1-25-kg