Home/P1P/SUNLU/PLA Marble
SUNLU · overlaid on Bambu's PLA Basic

SUNLU PLA Marble for the P1P

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a SUNLU PLA Marble spool — the big one first.

Bambu profiles its own filament, not SUNLU's. These start from Bambu's PLA Basic reference and apply SUNLU's published specs where available.
Max volumetric flowupdates live
12.6 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
150mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.02
starting point — refine on-machine
Flow ratio
0.98
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 21 mm³/s · Bambu default — SUNLU publishes none ⚠ clamped — capped below your target speed
SUNLU · PLA Marble Stone-fill tds
Nozzle215 °C
Densitynot published
Drying50 °C / 4 h
Mfr speed50–150 mm/s
Mfr bed50–60 °C
Cool / PLA plate; marble-look matte finish
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.98 · ceiling 21 mm³/s
Source
tds · manufacturer ↗

Why these numbers

SUNLU PLA Marble starts from Bambu's PLA Basic reference; SUNLU's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Cool / PLA plate; marble-look matte finish

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the SUNLU PLA Marble profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

SUNLU PLA Marble for the X1 Carbon
/p/x1c/sunlu/pla-marble
SUNLU PLA Marble for the A1
/p/a1/sunlu/pla-marble
SUNLU PLA Marble for the A1 mini
/p/a1_mini/sunlu/pla-marble
3D-Fuel Tough Pro PLA+ for the P1P
/p/p1p/3d-fuel/tough-pro-pla
Amazon Basics PLA Filament 1.75 mm for the P1P
/p/p1p/amazon-basics/pla-filament-1-75-mm
Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the P1P
/p/p1p/amazon-basics/pla-filament-1-75-mm-1-25-kg