Home/P1P/LANDU/Refill Hyper PETG
LANDU · overlaid on Bambu's PETG Basic

LANDU Refill Hyper PETG for the P1P

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a LANDU Refill Hyper PETG spool — the big one first.

Bambu profiles its own filament, not LANDU's. These start from Bambu's PETG Basic reference and apply LANDU's published specs where available.
Max volumetric flowupdates live
16.8 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
200mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.045
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 18 mm³/s · Bambu default — LANDU publishes none ⚠ clamped — capped below your target speed
LANDU · Refill Hyper PETG High-speed (refill) product page
Nozzle245 °C
Densitynot published
Mfr speed40–200 mm/s
Mfr bed75–80 °C
Same formulation; refillable-spool format. Speed envelope 40–200 published (vs 300 marketing claim)
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.95 · ceiling 18 mm³/s
Source
product page · manufacturer ↗

Why these numbers

LANDU Refill Hyper PETG starts from Bambu's PETG Basic reference; LANDU's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Same formulation; refillable-spool format. Speed envelope 40–200 published (vs 300 marketing claim)

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the LANDU Refill Hyper PETG profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

LANDU Refill Hyper PETG for the X1 Carbon
/p/x1c/landu/refill-hyper-petg
LANDU Refill Hyper PETG for the A1
/p/a1/landu/refill-hyper-petg
LANDU Refill Hyper PETG for the A1 mini
/p/a1_mini/landu/refill-hyper-petg
3D-Fuel Pro PETG for the P1P
/p/p1p/3d-fuel/pro-petg
Amazon Basics PETG Filament 1.75 mm for the P1P
/p/p1p/amazon-basics/petg-filament-1-75-mm
Amazon Basics PETG Filament 2.85 mm for the P1P
/p/p1p/amazon-basics/petg-filament-2-85-mm