Home/P1P/Bambu Lab/PLA Silk
Bambu Lab · overlaid on Bambu's PLA Basic

Bambu Lab PLA Silk for the P1P

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Bambu Lab PLA Silk spool — the big one first.

Bambu profiles its own filament, not Bambu Lab's. These start from Bambu's PLA Basic reference and apply Bambu Lab's published specs where available.
Max volumetric flowupdates live
21 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
250mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.02
starting point — refine on-machine
Flow ratio
0.98
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 21 mm³/s · Bambu default — Bambu Lab publishes none ⚠ clamped — capped below your target speed
Bambu Lab · PLA Silk Silk product page
Nozzle205 °C
Densitynot published
Drying50 °C / 8 h
Mfr speednot published
Mfr bed45–60 °C
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.98 · ceiling 21 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Bambu Lab PLA Silk starts from Bambu's PLA Basic reference; Bambu Lab's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Bambu Lab PLA Silk profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Bambu Lab PLA Silk for the X1 Carbon
/p/x1c/bambu-lab/pla-silk
Bambu Lab PLA Silk for the A1
/p/a1/bambu-lab/pla-silk
Bambu Lab PLA Silk for the A1 mini
/p/a1_mini/bambu-lab/pla-silk
3D-Fuel Tough Pro PLA+ for the P1P
/p/p1p/3d-fuel/tough-pro-pla
Amazon Basics PLA Filament 1.75 mm for the P1P
/p/p1p/amazon-basics/pla-filament-1-75-mm
Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the P1P
/p/p1p/amazon-basics/pla-filament-1-75-mm-1-25-kg