Home/H2S/Eryone/TPU High-Speed
Eryone · overlaid on Bambu's TPU 95A

Eryone TPU High-Speed for the H2S

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Eryone TPU High-Speed spool — the big one first.

Bambu profiles its own filament, not Eryone's. These start from Bambu's TPU 95A reference and apply Eryone's published specs where available.
Max volumetric flowupdates live
3.6 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
43mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.05
starting point — refine on-machine
Flow ratio
1
Bambu base (inherited)
Retraction length
1.2mm
Bambu base (inherited)
hotend ceiling 3.6 mm³/s · Bambu default — Eryone publishes none ⚠ clamped — capped below your target speed
Eryone · TPU High-Speed High-speed flexible tds
Nozzle210 °C
Density1.22 g/cm³
Drying80–90 °C / 12 h
Mfr speed≤300 mm/s
Mfr bed≤60 °C
Shore95A
Increase retraction to reduce stringing
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 1 · ceiling 3.6 mm³/s
Source
tds · manufacturer ↗

Why these numbers

Eryone TPU High-Speed starts from Bambu's TPU 95A reference; Eryone's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Increase retraction to reduce stringing

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Eryone TPU High-Speed profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Eryone TPU High-Speed for the X1 Carbon
/p/x1c/eryone/tpu-high-speed
Eryone TPU High-Speed for the A1
/p/a1/eryone/tpu-high-speed
Eryone TPU High-Speed for the A1 mini
/p/a1_mini/eryone/tpu-high-speed
Bambu Lab TPU 95A for the H2S
/p/h2s/bambu-lab/tpu-95a
ColorFabb TPU 85A for the H2S
/p/h2s/colorfabb/tpu-85a
ColorFabb TPU 95A for the H2S
/p/h2s/colorfabb/tpu-95a