Home/H2S/Creality/PETG (generic family)
Creality · overlaid on Bambu's PETG Basic

Creality PETG (generic family) for the H2S

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Creality PETG (generic family) spool — the big one first.

Bambu profiles its own filament, not Creality's. These start from Bambu's PETG Basic reference and apply Creality's published specs where available.
Max volumetric flowupdates live
4.2 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
50mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.045
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 18 mm³/s · Bambu default — Creality publishes none ⚠ clamped — capped below your target speed
Creality · PETG (generic family) Basic product page
Nozzle240 °C
Densitynot published
Mfr speed40–50 mm/s
Mfr bed85–95 °C
Reference-table 240 ±5 / 90 ±5; cooling fan ON; withdrawal 60 mm/s @ 6 mm
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.95 · ceiling 18 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Creality PETG (generic family) starts from Bambu's PETG Basic reference; Creality's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Reference-table 240 ±5 / 90 ±5; cooling fan ON; withdrawal 60 mm/s @ 6 mm

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Creality PETG (generic family) profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Creality PETG (generic family) for the X1 Carbon
/p/x1c/creality/petg-generic-family
Creality PETG (generic family) for the A1
/p/a1/creality/petg-generic-family
Creality PETG (generic family) for the A1 mini
/p/a1_mini/creality/petg-generic-family
3D-Fuel Pro PETG for the H2S
/p/h2s/3d-fuel/pro-petg
Amazon Basics PETG Filament 1.75 mm for the H2S
/p/h2s/amazon-basics/petg-filament-1-75-mm
Amazon Basics PETG Filament 2.85 mm for the H2S
/p/h2s/amazon-basics/petg-filament-2-85-mm