Home/H2S/Creality/Hyper PETG
Creality · overlaid on Bambu's PETG Basic

Creality Hyper PETG for the H2S

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Creality Hyper PETG spool — the big one first.

Bambu profiles its own filament, not Creality's. These start from Bambu's PETG Basic reference and apply Creality's published specs where available.
Max volumetric flowupdates live
18 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
214mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.045
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 18 mm³/s · Bambu default — Creality publishes none ⚠ clamped — capped below your target speed
Creality · Hyper PETG High-speed product page
Nozzle255 °CBambu base · not published
Densitynot published
Mfr speed≤300 mm/s
High-speed PETG line; specs not in the reference table
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.95 · ceiling 18 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Creality Hyper PETG starts from Bambu's PETG Basic reference; Creality's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

High-speed PETG line; specs not in the reference table

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Creality Hyper PETG profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Creality Hyper PETG for the X1 Carbon
/p/x1c/creality/hyper-petg
Creality Hyper PETG for the A1
/p/a1/creality/hyper-petg
Creality Hyper PETG for the A1 mini
/p/a1_mini/creality/hyper-petg
3D-Fuel Pro PETG for the H2S
/p/h2s/3d-fuel/pro-petg
Amazon Basics PETG Filament 1.75 mm for the H2S
/p/h2s/amazon-basics/petg-filament-1-75-mm
Amazon Basics PETG Filament 2.85 mm for the H2S
/p/h2s/amazon-basics/petg-filament-2-85-mm