Home/H2DP/Inland/PLA Basic
Inland · overlaid on Bambu's PLA Basic

Inland PLA Basic for the H2DP

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Inland PLA Basic spool — the big one first.

Bambu profiles its own filament, not Inland's. These start from Bambu's PLA Basic reference and apply Inland's published specs where available.
Max volumetric flowupdates live
21 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
250mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.02
starting point — refine on-machine
Flow ratio
0.98
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 21 mm³/s · Bambu default — Inland publishes none ⚠ clamped — capped below your target speed
Inland · PLA Basic Basic product page
Nozzle210 °C
Densitynot published
Mfr speednot published
Mfr bed35–60 °C
Entry-level cardboard-spool SKU; widest nozzle range in Inland PLA lineup
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

!
H2DP values are provisional
These envelope/flow values still need verifying against Bambu's shipped profile (SPEC.md §10).
Against Bambu stock
flow 0.98 · ceiling 21 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Inland PLA Basic starts from Bambu's PLA Basic reference; Inland's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Entry-level cardboard-spool SKU; widest nozzle range in Inland PLA lineup

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Inland PLA Basic profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Inland PLA Basic for the X1 Carbon
/p/x1c/inland/pla-basic
Inland PLA Basic for the A1
/p/a1/inland/pla-basic
Inland PLA Basic for the A1 mini
/p/a1_mini/inland/pla-basic
3D-Fuel Tough Pro PLA+ for the H2DP
/p/h2dp/3d-fuel/tough-pro-pla
Amazon Basics PLA Filament 1.75 mm for the H2DP
/p/h2dp/amazon-basics/pla-filament-1-75-mm
Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the H2DP
/p/h2dp/amazon-basics/pla-filament-1-75-mm-1-25-kg