Home/H2DP/Bambu Lab/PLA Matte
Bambu Lab · overlaid on Bambu's PLA Basic

Bambu Lab PLA Matte for the H2DP

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Bambu Lab PLA Matte spool — the big one first.

Bambu profiles its own filament, not Bambu Lab's. These start from Bambu's PLA Basic reference and apply Bambu Lab's published specs where available.
Max volumetric flowupdates live
21 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
250mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.02
starting point — refine on-machine
Flow ratio
0.98
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 21 mm³/s · Bambu default — Bambu Lab publishes none ⚠ clamped — capped below your target speed
Bambu Lab · PLA Matte Matte product page
Nozzle205 °C
Density1.31 g/cm³
Drying50 °C / 8 h (oven); 55 °C / 8 h (AMS 2 Pro / HT); 60–70 °C / 12 h (X1 heatbed)
Mfr speed≤300 mm/s
Mfr bed50–60 °C
Matte filler. Speed/density from V3.0 TDS PDF.
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

!
H2DP values are provisional
These envelope/flow values still need verifying against Bambu's shipped profile (SPEC.md §10).
Against Bambu stock
flow 0.98 · ceiling 21 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Bambu Lab PLA Matte starts from Bambu's PLA Basic reference; Bambu Lab's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Matte filler. Speed/density from V3.0 TDS PDF.

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Bambu Lab PLA Matte profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Bambu Lab PLA Matte for the X1 Carbon
/p/x1c/bambu-lab/pla-matte
Bambu Lab PLA Matte for the A1
/p/a1/bambu-lab/pla-matte
Bambu Lab PLA Matte for the A1 mini
/p/a1_mini/bambu-lab/pla-matte
3D-Fuel Tough Pro PLA+ for the H2DP
/p/h2dp/3d-fuel/tough-pro-pla
Amazon Basics PLA Filament 1.75 mm for the H2DP
/p/h2dp/amazon-basics/pla-filament-1-75-mm
Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the H2DP
/p/h2dp/amazon-basics/pla-filament-1-75-mm-1-25-kg