Home/H2DP/Bambu Lab/PETG HF
Bambu Lab · overlaid on Bambu's PETG HF

Bambu Lab PETG HF for the H2DP

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Bambu Lab PETG HF spool — the big one first.

Bambu profiles its own filament, not Bambu Lab's. These start from Bambu's PETG HF reference and apply Bambu Lab's published specs where available.
Max volumetric flowupdates live
25 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
298mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.045
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 25 mm³/s · Bambu default — Bambu Lab publishes none ⚠ clamped — capped below your target speed
Bambu Lab · PETG HF High-flow / high-speed product page
Nozzle245 °C
Density1.28 g/cm³
Drying65 °C / 8 h (oven); 75–85 °C / 12 h (X1 heatbed)
Mfr speed≤300 mm/s
Mfr bed60–80 °C
Smooth or textured PEI plate. Speed/density from V1.0 TDS PDF.
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

!
H2DP values are provisional
These envelope/flow values still need verifying against Bambu's shipped profile (SPEC.md §10).
Against Bambu stock
flow 0.95 · ceiling 25 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Bambu Lab PETG HF starts from Bambu's PETG HF reference; Bambu Lab's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Smooth or textured PEI plate. Speed/density from V1.0 TDS PDF.

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Bambu Lab PETG HF profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Bambu Lab PETG HF for the X1 Carbon
/p/x1c/bambu-lab/petg-hf
Bambu Lab PETG HF for the A1
/p/a1/bambu-lab/petg-hf
Bambu Lab PETG HF for the A1 mini
/p/a1_mini/bambu-lab/petg-hf