Home/H2DP/Bambu Lab/ABS
Bambu Lab · overlaid on Bambu's ABS

Bambu Lab ABS for the H2DP

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Bambu Lab ABS spool — the big one first.

Bambu profiles its own filament, not Bambu Lab's. These start from Bambu's ABS reference and apply Bambu Lab's published specs where available.
Max volumetric flowupdates live
16 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
190mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.04
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 16 mm³/s · Bambu default — Bambu Lab publishes none ⚠ clamped — capped below your target speed
Bambu Lab · ABS Basic product page
Nozzle250 °C
Density1.05 g/cm³
Drying80 °C / 8 h (oven); 90–100 °C / 12 h (X1 heatbed)
Mfr speed≤300 mm/s
Mfr bed90–110 °C
Enclosurerequired
Enclosure required. Speed/density/drying from V3.0 TDS PDF.
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

!
H2DP values are provisional
These envelope/flow values still need verifying against Bambu's shipped profile (SPEC.md §10).
Against Bambu stock
flow 0.95 · ceiling 16 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Bambu Lab ABS starts from Bambu's ABS reference; Bambu Lab's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Enclosure required. Speed/density/drying from V3.0 TDS PDF.

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Bambu Lab ABS profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Bambu Lab ABS for the X1 Carbon
/p/x1c/bambu-lab/abs
Bambu Lab ABS for the A1
/p/a1/bambu-lab/abs
Bambu Lab ABS for the A1 mini
/p/a1_mini/bambu-lab/abs
Amazon Basics ABS Filament 1.75 mm for the H2DP
/p/h2dp/amazon-basics/abs-filament-1-75-mm
Amazon Basics ABS Filament 2.85 mm for the H2DP
/p/h2dp/amazon-basics/abs-filament-2-85-mm
Creality ABS (generic family) for the H2DP
/p/h2dp/creality/abs-generic-family