Home/H2D/JAYO/PLA Wood
JAYO · overlaid on Bambu's PLA Basic

JAYO PLA Wood for the H2D

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a JAYO PLA Wood spool — the big one first.

Bambu profiles its own filament, not JAYO's. These start from Bambu's PLA Basic reference and apply JAYO's published specs where available.
Max volumetric flowupdates live
5.04 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
60mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.02
starting point — refine on-machine
Flow ratio
0.98
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 21 mm³/s · Bambu default — JAYO publishes none ⚠ clamped — capped below your target speed
JAYO · PLA Wood Wood-fill product page
Nozzle210 °C
Density1.25 g/cm³
Mfr speed40–60 mm/s
Mfr bed50–60 °C
TDS: density 1.25; HDT 53; lower max speed than std PLA
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.98 · ceiling 21 mm³/s
Source
product page · manufacturer ↗

Why these numbers

JAYO PLA Wood starts from Bambu's PLA Basic reference; JAYO's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

TDS: density 1.25; HDT 53; lower max speed than std PLA

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the JAYO PLA Wood profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

JAYO PLA Wood for the X1 Carbon
/p/x1c/jayo/pla-wood
JAYO PLA Wood for the A1
/p/a1/jayo/pla-wood
JAYO PLA Wood for the A1 mini
/p/a1_mini/jayo/pla-wood
3D-Fuel Tough Pro PLA+ for the H2D
/p/h2d/3d-fuel/tough-pro-pla
Amazon Basics PLA Filament 1.75 mm for the H2D
/p/h2d/amazon-basics/pla-filament-1-75-mm
Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the H2D
/p/h2d/amazon-basics/pla-filament-1-75-mm-1-25-kg