Home/H2D/Creality/Filaments for Advertising Letters
Creality · overlaid on Bambu's PLA Basic

Creality Filaments for Advertising Letters for the H2D

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Creality Filaments for Advertising Letters spool — the big one first.

Bambu profiles its own filament, not Creality's. These start from Bambu's PLA Basic reference and apply Creality's published specs where available.
Max volumetric flowupdates live
5.04 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
60mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.02
starting point — refine on-machine
Flow ratio
0.98
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 21 mm³/s · Bambu default — Creality publishes none ⚠ clamped — capped below your target speed
Creality · Filaments for Advertising Letters Architectural / signage product page
Nozzle220 °C
Densitynot published
Mfr speed50–60 mm/s
Mfr bed45–55 °C
Reference-table 220 ±5; specialty SKU for channel-letter signage
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.98 · ceiling 21 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Creality Filaments for Advertising Letters starts from Bambu's PLA Basic reference; Creality's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Reference-table 220 ±5; specialty SKU for channel-letter signage

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Creality Filaments for Advertising Letters profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Creality Filaments for Advertising Letters for the X1 Carbon
/p/x1c/creality/filaments-for-advertising-letters
Creality Filaments for Advertising Letters for the A1
/p/a1/creality/filaments-for-advertising-letters
Creality Filaments for Advertising Letters for the A1 mini
/p/a1_mini/creality/filaments-for-advertising-letters
3D-Fuel Tough Pro PLA+ for the H2D
/p/h2d/3d-fuel/tough-pro-pla
Amazon Basics PLA Filament 1.75 mm for the H2D
/p/h2d/amazon-basics/pla-filament-1-75-mm
Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the H2D
/p/h2d/amazon-basics/pla-filament-1-75-mm-1-25-kg