Home/H2C/SUNLU/TPU Silk
SUNLU · overlaid on Bambu's TPU 95A

SUNLU TPU Silk for the H2C

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a SUNLU TPU Silk spool — the big one first.

Bambu profiles its own filament, not SUNLU's. These start from Bambu's TPU 95A reference and apply SUNLU's published specs where available.
Max volumetric flowupdates live
3.6 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
43mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.05
starting point — refine on-machine
Flow ratio
1
Bambu base (inherited)
Retraction length
1.2mm
Bambu base (inherited)
hotend ceiling 3.6 mm³/s · Bambu default — SUNLU publishes none ⚠ clamped — capped below your target speed
SUNLU · TPU Silk Silk-finish flexible tds
Nozzle215 °C
Densitynot published
Drying50 °C / 4 h
Mfr speed50–200 mm/s
Mfr bed50–60 °C
Cool / PLA plate; high impact (756 J/m); elongation 436%
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 1 · ceiling 3.6 mm³/s
Source
tds · manufacturer ↗

Why these numbers

SUNLU TPU Silk starts from Bambu's TPU 95A reference; SUNLU's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Cool / PLA plate; high impact (756 J/m); elongation 436%

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the SUNLU TPU Silk profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

SUNLU TPU Silk for the X1 Carbon
/p/x1c/sunlu/tpu-silk
SUNLU TPU Silk for the A1
/p/a1/sunlu/tpu-silk
SUNLU TPU Silk for the A1 mini
/p/a1_mini/sunlu/tpu-silk
Bambu Lab TPU 95A for the H2C
/p/h2c/bambu-lab/tpu-95a
ColorFabb TPU 85A for the H2C
/p/h2c/colorfabb/tpu-85a
ColorFabb TPU 95A for the H2C
/p/h2c/colorfabb/tpu-95a