Home/H2C/Polymaker/Fiberon ASA-CF08
Polymaker · overlaid on Bambu's ASA

Polymaker Fiberon ASA-CF08 for the H2C

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Polymaker Fiberon ASA-CF08 spool — the big one first.

Bambu profiles its own filament, not Polymaker's. These start from Bambu's ASA reference and apply Polymaker's published specs where available.
Max volumetric flowupdates live
18 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
214mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.04
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 18 mm³/s · Bambu default — Polymaker publishes none ⚠ clamped — capped below your target speed
Polymaker · Fiberon ASA-CF08 Carbon-fibre ASA tds
Nozzle270 °CBambu base · not published
Densitynot published
DryingRequired
Mfr speed≤350 mm/s
Lightweight matte finish; high-speed up to 350 mm/s; HDT ≈ 103 °C
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

!
Bambu ships no ASA profile for the 0.4 mm nozzle
Tested sizes: 0.6, 0.8 mm. Using nearest defaults — verify with a calibration print.
Against Bambu stock
flow 0.95 · ceiling 18 mm³/s
Source
tds · manufacturer ↗

Why these numbers

Polymaker Fiberon ASA-CF08 starts from Bambu's ASA reference; Polymaker's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Lightweight matte finish; high-speed up to 350 mm/s; HDT ≈ 103 °C

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Polymaker Fiberon ASA-CF08 profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Polymaker Fiberon ASA-CF08 for the X1 Carbon
/p/x1c/polymaker/fiberon-asa-cf08
Polymaker Fiberon ASA-CF08 for the A1
/p/a1/polymaker/fiberon-asa-cf08
Polymaker Fiberon ASA-CF08 for the A1 mini
/p/a1_mini/polymaker/fiberon-asa-cf08
Bambu Lab ASA for the H2C
/p/h2c/bambu-lab/asa
Elegoo ASA for the H2C
/p/h2c/elegoo/asa
Eryone ASA for the H2C
/p/h2c/eryone/asa