Home/H2C/Eryone/TPU Standard
Eryone · overlaid on Bambu's TPU 95A

Eryone TPU Standard for the H2C

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Eryone TPU Standard spool — the big one first.

Bambu profiles its own filament, not Eryone's. These start from Bambu's TPU 95A reference and apply Eryone's published specs where available.
Max volumetric flowupdates live
2.52 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
30mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.05
starting point — refine on-machine
Flow ratio
1
Bambu base (inherited)
Retraction length
1.2mm
Bambu base (inherited)
hotend ceiling 3.6 mm³/s · Bambu default — Eryone publishes none ⚠ clamped — capped below your target speed
Eryone · TPU Standard Flexible product page
Nozzle205 °C
Densitynot published
Mfr speed10–30 mm/s
Mfr bed55–70 °C
Shore95A
PEI bed 55–70 °C; glass bed 40–60 °C. Retract 4–5 mm. Bowden-extruder targeted. Specs from UK Shopify JSON.
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 1 · ceiling 3.6 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Eryone TPU Standard starts from Bambu's TPU 95A reference; Eryone's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

PEI bed 55–70 °C; glass bed 40–60 °C. Retract 4–5 mm. Bowden-extruder targeted. Specs from UK Shopify JSON.

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Eryone TPU Standard profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Eryone TPU Standard for the X1 Carbon
/p/x1c/eryone/tpu-standard
Eryone TPU Standard for the A1
/p/a1/eryone/tpu-standard
Eryone TPU Standard for the A1 mini
/p/a1_mini/eryone/tpu-standard
Bambu Lab TPU 95A for the H2C
/p/h2c/bambu-lab/tpu-95a
ColorFabb TPU 85A for the H2C
/p/h2c/colorfabb/tpu-85a
ColorFabb TPU 95A for the H2C
/p/h2c/colorfabb/tpu-95a