Home/H2C/Eryone/ABS High-Speed
Eryone · overlaid on Bambu's ABS

Eryone ABS High-Speed for the H2C

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Eryone ABS High-Speed spool — the big one first.

Bambu profiles its own filament, not Eryone's. These start from Bambu's ABS reference and apply Eryone's published specs where available.
Max volumetric flowupdates live
16 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
190mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.04
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 16 mm³/s · Bambu default — Eryone publishes none ⚠ clamped — capped below your target speed
Eryone · ABS High-Speed High-speed tds
Nozzle265 °C
Density1.1 g/cm³
Drying90–100 °C / 12 h
Mfr speed30–600 mm/s
Mfr bed80–110 °C
Enclosurerequired
Enclosure required
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.95 · ceiling 16 mm³/s
Source
tds · manufacturer ↗

Why these numbers

Eryone ABS High-Speed starts from Bambu's ABS reference; Eryone's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Enclosure required

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Eryone ABS High-Speed profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Eryone ABS High-Speed for the X1 Carbon
/p/x1c/eryone/abs-high-speed
Eryone ABS High-Speed for the A1
/p/a1/eryone/abs-high-speed
Eryone ABS High-Speed for the A1 mini
/p/a1_mini/eryone/abs-high-speed
Amazon Basics ABS Filament 1.75 mm for the H2C
/p/h2c/amazon-basics/abs-filament-1-75-mm
Amazon Basics ABS Filament 2.85 mm for the H2C
/p/h2c/amazon-basics/abs-filament-2-85-mm
Bambu Lab ABS for the H2C
/p/h2c/bambu-lab/abs