Home/H2C/Elegoo/PAHT-CF
Elegoo · overlaid on Bambu's PA-CF

Elegoo PAHT-CF for the H2C

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Elegoo PAHT-CF spool — the big one first.

Bambu profiles its own filament, not Elegoo's. These start from Bambu's PA-CF reference and apply Elegoo's published specs where available.
Max volumetric flowupdates live
8 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
95mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.018
starting point — refine on-machine
Flow ratio
0.96
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 8 mm³/s · Bambu default — Elegoo publishes none ⚠ clamped — capped below your target speed
Elegoo · PAHT-CF High-temp CF nylon product page
Nozzle280 °CBambu base · not published
Densitynot published
Mfr speednot published
Heated dryer recommended
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.96 · ceiling 8 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Elegoo PAHT-CF starts from Bambu's PA-CF reference; Elegoo's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Heated dryer recommended

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Elegoo PAHT-CF profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Elegoo PAHT-CF for the X1 Carbon
/p/x1c/elegoo/paht-cf
Elegoo PAHT-CF for the A1
/p/a1/elegoo/paht-cf
Elegoo PAHT-CF for the A1 mini
/p/a1_mini/elegoo/paht-cf
Bambu Lab PA-CF / PAHT-CF for the H2C
/p/h2c/bambu-lab/pa-cf-paht-cf
ColorFabb PA Neat / PA-CF for the H2C
/p/h2c/colorfabb/pa-neat-pa-cf
Eryone PA12-CF for the H2C
/p/h2c/eryone/pa12-cf