Home/A1 mini/SUNLU/PETG Glow in the Dark
SUNLU · overlaid on Bambu's PETG Basic

SUNLU PETG Glow in the Dark for the A1 mini

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a SUNLU PETG Glow in the Dark spool — the big one first.

Bambu profiles its own filament, not SUNLU's. These start from Bambu's PETG Basic reference and apply SUNLU's published specs where available.
Max volumetric flowupdates live
8.4 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
100mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.045
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 13 mm³/s · Bambu default — SUNLU publishes none ⚠ clamped — capped below your target speed
SUNLU · PETG Glow in the Dark Glow / aesthetic product page
Nozzle240 °C
Densitynot published
Mfr speed50–100 mm/s
Mfr bed70–80 °C
235–245 °C @ 50–100 mm/s; 245–250 °C at higher speeds; hardened nozzle
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.95 · ceiling 13 mm³/s
Source
product page · manufacturer ↗

Why these numbers

SUNLU PETG Glow in the Dark starts from Bambu's PETG Basic reference; SUNLU's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

235–245 °C @ 50–100 mm/s; 245–250 °C at higher speeds; hardened nozzle

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the SUNLU PETG Glow in the Dark profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

SUNLU PETG Glow in the Dark for the X1 Carbon
/p/x1c/sunlu/petg-glow-in-the-dark
SUNLU PETG Glow in the Dark for the A1
/p/a1/sunlu/petg-glow-in-the-dark
SUNLU PETG Glow in the Dark for the P1S
/p/p1s/sunlu/petg-glow-in-the-dark
3D-Fuel Pro PETG for the A1 mini
/p/a1_mini/3d-fuel/pro-petg
Amazon Basics PETG Filament 1.75 mm for the A1 mini
/p/a1_mini/amazon-basics/petg-filament-1-75-mm
Amazon Basics PETG Filament 2.85 mm for the A1 mini
/p/a1_mini/amazon-basics/petg-filament-2-85-mm