Home/A1 mini/Inland/PETG
Inland · overlaid on Bambu's PETG Basic

Inland PETG for the A1 mini

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Inland PETG spool — the big one first.

Bambu profiles its own filament, not Inland's. These start from Bambu's PETG Basic reference and apply Inland's published specs where available.
Max volumetric flowupdates live
13 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
155mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.045
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 13 mm³/s · Bambu default — Inland publishes none ⚠ clamped — capped below your target speed
Inland · PETG Basic product page
Nozzle235 °C
Densitynot published
Mfr speednot published
Cardboard-spool standard PETG
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.95 · ceiling 13 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Inland PETG starts from Bambu's PETG Basic reference; Inland's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Cardboard-spool standard PETG

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Inland PETG profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Inland PETG for the X1 Carbon
/p/x1c/inland/petg
Inland PETG for the A1
/p/a1/inland/petg
Inland PETG for the P1S
/p/p1s/inland/petg
3D-Fuel Pro PETG for the A1 mini
/p/a1_mini/3d-fuel/pro-petg
Amazon Basics PETG Filament 1.75 mm for the A1 mini
/p/a1_mini/amazon-basics/petg-filament-1-75-mm
Amazon Basics PETG Filament 2.85 mm for the A1 mini
/p/a1_mini/amazon-basics/petg-filament-2-85-mm