Home/A1 mini/Inland/High Speed PLA+
Inland · overlaid on Bambu's PLA Basic

Inland High Speed PLA+ for the A1 mini

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Inland High Speed PLA+ spool — the big one first.

Bambu profiles its own filament, not Inland's. These start from Bambu's PLA Basic reference and apply Inland's published specs where available.
Max volumetric flowupdates live
21 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
250mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.02
starting point — refine on-machine
Flow ratio
0.98
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 21 mm³/s · Bambu default — Inland publishes none ⚠ clamped — capped below your target speed
Inland · High Speed PLA+ High-speed tough product page
Nozzle220 °C
Densitynot published
Mfr speednot published
Mfr bed60–80 °C
Engineered for high-speed printers
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.98 · ceiling 21 mm³/s
Source
product page · manufacturer ↗

Why these numbers

Inland High Speed PLA+ starts from Bambu's PLA Basic reference; Inland's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Engineered for high-speed printers

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Inland High Speed PLA+ profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Inland High Speed PLA+ for the X1 Carbon
/p/x1c/inland/high-speed-pla
Inland High Speed PLA+ for the A1
/p/a1/inland/high-speed-pla
Inland High Speed PLA+ for the P1S
/p/p1s/inland/high-speed-pla
3D-Fuel Tough Pro PLA+ for the A1 mini
/p/a1_mini/3d-fuel/tough-pro-pla
Amazon Basics PLA Filament 1.75 mm for the A1 mini
/p/a1_mini/amazon-basics/pla-filament-1-75-mm
Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the A1 mini
/p/a1_mini/amazon-basics/pla-filament-1-75-mm-1-25-kg