Home/A1 mini/Amazon Basics/ABS Filament 2.85 mm
Amazon Basics · overlaid on Bambu's ABS

Amazon Basics ABS Filament 2.85 mm for the A1 mini

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Amazon Basics ABS Filament 2.85 mm spool — the big one first.

Bambu profiles its own filament, not Amazon Basics's. These start from Bambu's ABS reference and apply Amazon Basics's published specs where available.
Max volumetric flowupdates live
16 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
190mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.04
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 16 mm³/s · Bambu default — Amazon Basics publishes none ⚠ clamped — capped below your target speed
Amazon Basics · ABS Filament 2.85 mm Basic tds
Nozzle250 °C
Densitynot published
Drying15–25 °C / dry storage
Mfr speednot published
Mfr bed95–110 °C
Same params as 1.75 mm ABS; 3 ASINs (B07SZLZ43X, B07T4X57Q1, B07SZLZ12D)
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.95 · ceiling 16 mm³/s
Source
tds · manufacturer ↗

Why these numbers

Amazon Basics ABS Filament 2.85 mm starts from Bambu's ABS reference; Amazon Basics's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Same params as 1.75 mm ABS; 3 ASINs (B07SZLZ43X, B07T4X57Q1, B07SZLZ12D)

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Amazon Basics ABS Filament 2.85 mm profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Amazon Basics ABS Filament 2.85 mm for the X1 Carbon
/p/x1c/amazon-basics/abs-filament-2-85-mm
Amazon Basics ABS Filament 2.85 mm for the A1
/p/a1/amazon-basics/abs-filament-2-85-mm
Amazon Basics ABS Filament 2.85 mm for the P1S
/p/p1s/amazon-basics/abs-filament-2-85-mm
Amazon Basics ABS Filament 1.75 mm for the A1 mini
/p/a1_mini/amazon-basics/abs-filament-1-75-mm
Bambu Lab ABS for the A1 mini
/p/a1_mini/bambu-lab/abs
Creality ABS (generic family) for the A1 mini
/p/a1_mini/creality/abs-generic-family