Home/A1/JAYO/PLA Matte
JAYO · overlaid on Bambu's PLA Basic

JAYO PLA Matte for the A1

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a JAYO PLA Matte spool — the big one first.

Bambu profiles its own filament, not JAYO's. These start from Bambu's PLA Basic reference and apply JAYO's published specs where available.
Max volumetric flowupdates live
8.4 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
100mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.02
starting point — refine on-machine
Flow ratio
0.98
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 21 mm³/s · Bambu default — JAYO publishes none ⚠ clamped — capped below your target speed
JAYO · PLA Matte Matte product page
Nozzle210 °C
Density1.3 g/cm³
Mfr speed50–100 mm/s
Mfr bed50–60 °C
TDS: density 1.30; HDT 53; modulus 4780 MPa (highest in PLA range)
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.98 · ceiling 21 mm³/s
Source
product page · manufacturer ↗

Why these numbers

JAYO PLA Matte starts from Bambu's PLA Basic reference; JAYO's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

TDS: density 1.30; HDT 53; modulus 4780 MPa (highest in PLA range)

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the JAYO PLA Matte profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

JAYO PLA Matte for the X1 Carbon
/p/x1c/jayo/pla-matte
JAYO PLA Matte for the A1 mini
/p/a1_mini/jayo/pla-matte
JAYO PLA Matte for the P1S
/p/p1s/jayo/pla-matte
3D-Fuel Tough Pro PLA+ for the A1
/p/a1/3d-fuel/tough-pro-pla
Amazon Basics PLA Filament 1.75 mm for the A1
/p/a1/amazon-basics/pla-filament-1-75-mm
Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the A1
/p/a1/amazon-basics/pla-filament-1-75-mm-1-25-kg