Home/A1/FlashForge/Flexible (TPU)
FlashForge · overlaid on Bambu's TPU 95A

FlashForge Flexible (TPU) for the A1

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a FlashForge Flexible (TPU) spool — the big one first.

Bambu profiles its own filament, not FlashForge's. These start from Bambu's TPU 95A reference and apply FlashForge's published specs where available.
Max volumetric flowupdates live
3.36 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
40mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.05
starting point — refine on-machine
Flow ratio
1
Bambu base (inherited)
Retraction length
1.2mm
Bambu base (inherited)
hotend ceiling 3.6 mm³/s · Bambu default — FlashForge publishes none ⚠ clamped — capped below your target speed
FlashForge · Flexible (TPU) Flexible tds
Nozzle210 °C
Densitynot published
Mfr speed20–40 mm/s
Mfr bed25–60 °C
Tensile 15–20 MPa; flexural <10 MPa; water absorption 0.5%
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 1 · ceiling 3.6 mm³/s
Source
tds · manufacturer ↗

Why these numbers

FlashForge Flexible (TPU) starts from Bambu's TPU 95A reference; FlashForge's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Tensile 15–20 MPa; flexural <10 MPa; water absorption 0.5%

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the FlashForge Flexible (TPU) profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

FlashForge Flexible (TPU) for the X1 Carbon
/p/x1c/flashforge/flexible-tpu
FlashForge Flexible (TPU) for the A1 mini
/p/a1_mini/flashforge/flexible-tpu
FlashForge Flexible (TPU) for the P1S
/p/p1s/flashforge/flexible-tpu
Bambu Lab TPU 95A for the A1
/p/a1/bambu-lab/tpu-95a
ColorFabb TPU 85A for the A1
/p/a1/colorfabb/tpu-85a
ColorFabb TPU 95A for the A1
/p/a1/colorfabb/tpu-95a