Max volumetric flowupdates live

15 mm³/s The single value Bambu Studio can’t guess for you

Effective top speed

179mm/s

you asked for 300

target 300 → clamped

Pressure advance K

0.02

starting point — refine on-machine

Flow ratio

0.5

eSUN’s published value

Retraction length

0.8mm

Bambu base (inherited)

hotend ceiling 15 mm³/s · eSUN’s published ceiling ⚠ clamped — capped below your target speed

eSUN · PLA-LW Foaming light-weight profile zip

Nozzle250 °C

Densitynot published

Mfr speednot published

Mfr bed50 °C

Inherits PLA Basic @BBL A1; nozzle 250, flow 0.5 (foaming), vol 15; bed 50

manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock

flow 0.5 · ceiling 15 mm³/s

Source

profile zip · manufacturer ↗

Why these numbers

eSUN PLA-LW starts from Bambu's PLA Basic reference; eSUN's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Inherits PLA Basic @BBL A1; nozzle 250, flow 0.5 (foaming), vol 15; bed 50

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the eSUN PLA-LW profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

eSUN PLA-LW for the X1 Carbon

/p/x1c/esun/pla-lw

eSUN PLA-LW for the A1 mini

/p/a1_mini/esun/pla-lw

eSUN PLA-LW for the P1S

/p/p1s/esun/pla-lw

3D-Fuel Tough Pro PLA+ for the A1

/p/a1/3d-fuel/tough-pro-pla

Amazon Basics PLA Filament 1.75 mm for the A1

/p/a1/amazon-basics/pla-filament-1-75-mm

Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the A1

/p/a1/amazon-basics/pla-filament-1-75-mm-1-25-kg