Home/A1/Eryone/PLA High-Speed
Eryone · overlaid on Bambu's PLA Basic

Eryone PLA High-Speed for the A1

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Eryone PLA High-Speed spool — the big one first.

Bambu profiles its own filament, not Eryone's. These start from Bambu's PLA Basic reference and apply Eryone's published specs where available.
Max volumetric flowupdates live
21 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
250mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.02
starting point — refine on-machine
Flow ratio
0.98
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 21 mm³/s · Bambu default — Eryone publishes none ⚠ clamped — capped below your target speed
Eryone · PLA High-Speed High-speed tds
Nozzle210 °C
Density1.23 g/cm³
Drying65–75 °C / 12 h
Mfr speed≤600 mm/s
Mfr bed35–60 °C
Engineered for high-speed printers
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.98 · ceiling 21 mm³/s
Source
tds · manufacturer ↗

Why these numbers

Eryone PLA High-Speed starts from Bambu's PLA Basic reference; Eryone's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Engineered for high-speed printers

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Eryone PLA High-Speed profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Eryone PLA High-Speed for the X1 Carbon
/p/x1c/eryone/pla-high-speed
Eryone PLA High-Speed for the A1 mini
/p/a1_mini/eryone/pla-high-speed
Eryone PLA High-Speed for the P1S
/p/p1s/eryone/pla-high-speed
3D-Fuel Tough Pro PLA+ for the A1
/p/a1/3d-fuel/tough-pro-pla
Amazon Basics PLA Filament 1.75 mm for the A1
/p/a1/amazon-basics/pla-filament-1-75-mm
Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the A1
/p/a1/amazon-basics/pla-filament-1-75-mm-1-25-kg