Max volumetric flowupdates live

5.04 mm³/s The single value Bambu Studio can’t guess for you

Effective top speed

60mm/s

you asked for 300

target 300 → clamped

Pressure advance K

0.02

starting point — refine on-machine

Flow ratio

0.98

Bambu base (inherited)

Retraction length

0.8mm

Bambu base (inherited)

hotend ceiling 21 mm³/s · Bambu default — Creality publishes none ⚠ clamped — capped below your target speed

Creality · PLA Wood Wood-fill product page

Nozzle225 °C

Densitynot published

Mfr speed50–60 mm/s

Mfr bed45–55 °C

Reference-table 225 ±5; expect more clogging on 0.4 mm nozzles

manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock

flow 0.98 · ceiling 21 mm³/s

Source

product page · manufacturer ↗

Why these numbers

Creality PLA Wood starts from Bambu's PLA Basic reference; Creality's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Reference-table 225 ±5; expect more clogging on 0.4 mm nozzles

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Creality PLA Wood profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Creality PLA Wood for the X1 Carbon

/p/x1c/creality/pla-wood

Creality PLA Wood for the A1 mini

/p/a1_mini/creality/pla-wood

Creality PLA Wood for the P1S

/p/p1s/creality/pla-wood

3D-Fuel Tough Pro PLA+ for the A1

/p/a1/3d-fuel/tough-pro-pla

Amazon Basics PLA Filament 1.75 mm for the A1

/p/a1/amazon-basics/pla-filament-1-75-mm

Amazon Basics PLA Filament 1.75 mm (1.25 kg) for the A1

/p/a1/amazon-basics/pla-filament-1-75-mm-1-25-kg