Home/A1/Amazon Basics/PETG Filament 2.85 mm
Amazon Basics · overlaid on Bambu's PETG Basic

Amazon Basics PETG Filament 2.85 mm for the A1

with a 0.4 mm nozzle

The five values to type into Bambu Studio for a Amazon Basics PETG Filament 2.85 mm spool — the big one first.

Bambu profiles its own filament, not Amazon Basics's. These start from Bambu's PETG Basic reference and apply Amazon Basics's published specs where available.
Max volumetric flowupdates live
18 mm³/s The single value Bambu Studio can’t guess for you
Effective top speed
214mm/s
you asked for 300
target 300 → clamped
Pressure advance K
0.045
starting point — refine on-machine
Flow ratio
0.95
Bambu base (inherited)
Retraction length
0.8mm
Bambu base (inherited)
hotend ceiling 18 mm³/s · Bambu default — Amazon Basics publishes none ⚠ clamped — capped below your target speed
Amazon Basics · PETG Filament 2.85 mm Basic tds
Nozzle240 °C
Densitynot published
Drying15–25 °C / dry storage
Mfr speednot published
Mfr bed70–90 °C
Same params as 1.75 mm PETG; 3 ASINs (B07T4X4RQH, B07SZLZG5G, B07SZLZ241)
manufacturer source ↗

Is this right for your spool?

Here's how sure we are — and what to watch.

Against Bambu stock
flow 0.95 · ceiling 18 mm³/s
Source
tds · manufacturer ↗

Why these numbers

Amazon Basics PETG Filament 2.85 mm starts from Bambu's PETG Basic reference; Amazon Basics's published specs are overlaid where available, and everything else stays at Bambu's calibrated default.

Same params as 1.75 mm PETG; 3 ASINs (B07T4X4RQH, B07SZLZG5G, B07SZLZ241)

Treat these as a starting point — run a flow-test cube and Bambu's Flow Dynamics calibration after import for the last few percent.

Open in the wizard → change printer, nozzle or speed

Download the Amazon Basics PETG Filament 2.85 mm profile

A .zip with the Bambu Studio .json and a Markdown summary of every field.

Open in the wizard
i
Then calibrate in the slicer. Run Device → Calibration → Flow Dynamics after import to lock in the K-factor.

More combinations

Amazon Basics PETG Filament 2.85 mm for the X1 Carbon
/p/x1c/amazon-basics/petg-filament-2-85-mm
Amazon Basics PETG Filament 2.85 mm for the A1 mini
/p/a1_mini/amazon-basics/petg-filament-2-85-mm
Amazon Basics PETG Filament 2.85 mm for the P1S
/p/p1s/amazon-basics/petg-filament-2-85-mm
3D-Fuel Pro PETG for the A1
/p/a1/3d-fuel/pro-petg
Amazon Basics PETG Filament 1.75 mm for the A1
/p/a1/amazon-basics/petg-filament-1-75-mm
Bambu Lab PETG Translucent for the A1
/p/a1/bambu-lab/petg-translucent